RM新时代网站-首页

Valve plate spraying is a process of coating the surface of a valve plate, which has the following advantages: 1、 Improved anti-corrosion performance 1. Form a protective film The sprayed coating can form a continuous protective film on the surface of the valve plate. This protective film can effectively isolate the valve plate material from contact with corrosive media such as acids, al

Lithium battery equipment spraying mainly refers to the surface spraying treatment of lithium battery production equipment, which has the following characteristics: 1. High surface quality requirements High precision appearance effect: The appearance quality of lithium battery equipment has a significant impact on product image and the cleanliness of the production environment. The surface a

When spraying the air duct vibrating screen, the following aspects should be noted: 1. Surface pretreatment Clean the surface Firstly, it is necessary to remove impurities such as dirt, grease, dust, and rust from the surface of the air duct vibrating screen. Special cleaning agents and tools such as organic solvents can be used to clean oil stains, and steel wire brushes or sandpaper ca

Tightly lined PTFE sheets have the following applications in the electronic field: As an insulation material for circuit boards：PTFE has extremely good electrical insulation performance. Tightly lined PTFE boards can effectively isolate the current between different circuits and electronic components on the circuit board, prevent current leakage, short circuits, and other problems, thereby

Valve plate spraying is a job that requires correct operation. Here are some precautions: 1、 In terms of preliminary preparation 1. Surface treatment Cleaning: The surface of the valve plate must be cleaned to remove impurities such as oil stains, rust, and old paint layers. Specialized cleaning agents, such as metal oil stain cleaners, can be used to clean by soaking, wiping, or rinsing.

Tightly lined PTFE sheets have the following characteristics: 1、 Good corrosion resistance 1. Resistance to chemical erosion Tightly lined PTFE sheets have strong resistance to the vast majority of chemicals. Both strong acids (such as sulfuric acid, hydrochloric acid, nitric acid, etc.), strong bases (such as sodium hydroxide, potassium hydroxide, etc.), and various organic solvents (suc